Reverse Cycle Air Conditioning Glen Waverley for Year-Round Comfort

Peak Air Conditioning Glen Waverley installs reverse cycle air conditioning Glen Waverley households use as their main heater as well as their summer cooling. A reverse cycle system is a heat pump: it moves heat out of the house in summer and draws heat in from the outside air in winter, all from one indoor and one outdoor unit. The choice covers wall-mounted splits for living rooms and bedrooms, floor consoles for rooms that need warmth at foot level, and ducted or multi-head systems for the whole home. Each system is sized to the heating capacity the room needs on a cold morning, not only the cooling figure on the box. Refrigerant work is done under an ARC refrigerant handling licence, and a written quote follows an on-site inspection, with bookings taken from 6am to 10pm, seven days.

GET A FREE QUOTE

Licensed Air Conditioning Glen Waverley Technicians for Reverse Cycle Air Conditioning

Air conditioning work in Glen Waverley draws on three licensed trades: refrigerant handling, electrical connection and, for gas heating, gasfitting. Peak Air Conditioning Glen Waverley is based in the suburb, so a job off Kingsway, in a Legend Park Estate house or in a new townhouse near the station is a local trip rather than a drive across Melbourne. Two things decide whether a new or repaired system performs: who handles the work, and how the system is sized for the rooms it serves.

Peak Air Conditioning Glen Waverley

Reverse Cycle Air Conditioning Glen Waverley: Wall, Floor and Whole-Home Units

Reverse cycle air conditioning in Glen Waverley comes in three main forms, and the right one depends on how many rooms need heating, where warmth is wanted and how much space the house has for indoor and outdoor units. The suburb's 1950s to 1970s homes on larger blocks and its newer townhouses on subdivided lots tend to suit different layouts.

Reverse Cycle Split Systems for Living Rooms and Bedrooms

A wall-mounted reverse cycle split is the most common way to heat one room with a heat pump. The indoor head sits high on the wall and the outdoor unit sits outside, joined by insulated refrigerant pipes. In a living room it often replaces a gas wall heater as the main heat source, while in a bedroom it can warm the room before bed and cool it on a hot night. The split system installation page covers bracket, pipe and drain work in detail.

Floor Console Units for Heat at Floor Level

A floor console sits low on the wall, about where an old gas heater or panel heater would have stood. Daikin describes its floor standing units as suited to homes where heating is a priority more months of the year, noting that a unit mounted lower warms the ground more effectively. Consoles also suit rooms with high windows or no clear wall space near the ceiling, such as a sunroom or a room with a raked ceiling.

Whole-Home Reverse Cycle Through Ducted and Multi-Head Systems

For a whole house, there are two routes. A ducted reverse cycle system hides a fan coil in the roof and delivers warm or cool air through a ceiling outlet in each room, with zones so living areas and bedrooms run separately; the ducted air conditioning page covers design and zoning. A multi-head system instead runs two or more wall or floor heads from one outdoor unit, which suits townhouses and homes without much roof space for ductwork.

Forest Hill Emergency Air Conditioning Repair
Clayton Emergency Air Conditioning Repair

Peak Air Conditioning Glen Waverley

How a Reverse Cycle System Is Sized and Installed for Heating

A reverse cycle air conditioning installation that is meant to heat the house through winter is planned around the heating job first. The steps below are where a heating-led install differs from one planned only for summer cooling.

Sizing to Heating Capacity, Not Cooling Capacity Alone

Every reverse cycle unit has two rated outputs, one for cooling and one for heating, and the heating figure is often different from the cooling figure. A room's heat loss in winter depends on its floor area, ceiling height, glazing, insulation and draughts, and a large single-glazed living room in an older brick home can lose heat quickly. The heat load check works out the heating output the room needs on a cold morning, then the unit is chosen so its rated heating capacity covers that load, rather than picking it from the cooling figure alone.

Indoor Unit Height and Warm Air Throw

Warm air rises, so a wall unit used mainly for heating needs to sit where its louvres can push air down towards the floor and across the room. Daikin notes that wall units are mounted high for better airflow and circulation of conditioned air. The installer checks that furniture, curtains and pelmets will not block the airflow, and that the warm stream will reach the seating area rather than stall near the ceiling. In a long open-plan room, the unit is placed so its throw covers the length of the space.

Outdoor Unit Clearance, Drainage and Defrost Water

In heat mode, the outdoor coil gets colder than the outside air, so on cold, damp mornings frost can form on it. The unit then runs a short defrost cycle to melt the ice, and that melt water drains from the base of the outdoor unit. The outdoor unit therefore needs a position where this water can run away safely, clear of paths where it could pool or freeze, plus open space around the coil so air can flow freely. A raised slab or wall bracket keeps the base clear of standing water and garden debris.

Commissioning and Testing in Heat Mode

Once the pipes are joined, the system is pressure tested with nitrogen, evacuated with a vacuum pump to remove air and moisture, then the refrigerant is released and the unit is started. Commissioning includes running it in heat mode as well as cooling mode, because an install tested only on cooling can hide a heating fault until winter. The technician checks the air temperature coming from the indoor unit, the drain flow, the controls and the remote or app, then shows the household how to set the heating schedule.

Peak Air Conditioning Glen Waverley

Why Choose Peak Air Conditioning Glen Waverley

Peak Air Conditioning Glen Waverley sets out the licences, the heating output and the price in writing before any reverse cycle work starts, so the household can compare like with like.

ARCtick Refrigerant Licence and Electrical Compliance

Under Australian rules, any person who installs, commissions or services refrigeration and air conditioning equipment must hold a refrigerant handling licence, issued through ARC and known as ARCtick. That covers the pipe connections, the vacuum and the refrigerant charge. Where a new circuit or isolator is needed, the work is done by a licensed electrician, who must give the customer a copy of the Certificate of Electrical Safety (Energy Safe Victoria). The manufacturer warranty applies when the system is installed to the manufacturer's requirements, so these records are worth keeping.

Written Quote Stating the Heating Capacity in kW

The written quote names the model, its rated cooling and heating capacity in kW and its star ratings, so it is clear what the household is paying for in winter as well as summer. Two quotes for a similar-looking unit can differ in heating output, and the Zoned Energy Rating Label shows heating capacity at two outdoor temperatures, which makes the colder figure the one to compare. The quote also lists the pipe run, brackets, any electrical work and removal of old equipment, so the price can be checked line by line.

Bookings From 6am to 10pm, Including Weekends

Calls and bookings are taken from 6am to 10pm, seven days, including Saturdays and Sundays. That makes it easier to book an inspection before work, after school pick-up or on a weekend, when the whole household can be home to talk through which rooms need heating. Same-day inspections are offered where possible. For an existing system that has stopped heating, the air conditioning service page covers servicing and fault checks.

Burwood East Emergency Air Conditioning Repair
Clayton Emergency Air Conditioning Repair

Peak Air Conditioning Glen Waverley

What Reverse Cycle Air Conditioning Costs in Glen Waverley

The figures below come from published Melbourne cost guides and are indicative only, not a set price. The final cost depends on the unit's capacity, the pipe run, access, electrical work and any old equipment to remove, and a written quote follows the inspection.

Reverse Cycle Air Conditioning Installation Cost for One Room

For a single room, the whatsthedamage.com.au Melbourne guide puts a supplied and installed split at around $1,250 to $2,625 for 2.5 kW, $1,475 to $2,950 for 3.5 kW and $1,900 to $3,675 for 5 kW (updated November 2026). A Melbourne installer's calculator gives a 3.5 kW back-to-back job at around $2,100 to $2,600, and suggests allowing roughly $450 extra where a new circuit is needed (Climate Control Solutions, reviewed July 2026). A larger living room that needs a 7 kW unit sits higher, at around $2,300 to $4,725 in the whatsthedamage.com.au table.

Pricing Several Rooms or a Whole House

Several rooms can be priced as separate splits, a multi-head system or a ducted system. The whatsthedamage.com.au Melbourne guide puts a two-head multi-split at around $4,200 to $7,900 installed, and a standard ducted system for a three-bedroom home, or a single-storey four-bedroom with good roof access, at around $8,400 to $14,700. Larger, two-storey or zoned room-by-room ducted homes run to around $12,600 to $23,100 in the same guide (November 2026). Roof access, storeys and the number of zones move a whole-home price the most.

Removing an Old Gas Heater or Air Conditioner

Replacing an old air conditioner adds removal and disposal, which the whatsthedamage.com.au guide puts at around $105 to $370 for an old unit. The refrigerant from the old system has to be recovered by a licensed technician, never vented. Removing a gas heater is a separate job: the gas supply must be disconnected and capped by a licensed gasfitter registered with the Building and Plumbing Commission, and any flue or wall vent made good. No reliable published figure was found for gas heater removal alone, so it is priced at inspection.

Victorian Energy Upgrades Discount Off the Install Price

The Victorian Energy Upgrades program lists a discount of up to $1,610 when a non-ducted gas space heater is replaced with an efficient reverse cycle air conditioner, and indicative discounts of $630 to $1,610 for 3 kW to 9 kW room systems. Replacing a ducted gas heater with ducted reverse cycle can attract up to $5,530 for a 22.4 kW system (energy.vic.gov.au, updated 29 October 2026). The product must be approved under the program, be high efficiency and carry a minimum 5-year warranty for a home, and a replaced system must be in a property more than 2 years old.

Peak Air Conditioning Glen Waverley

Reverse Cycle Air Conditioning Versus Gas Heating

Where a Glen Waverley home still heats with gas, whether a wall heater in the lounge or gas ducted heating through floor or ceiling vents, switching to reverse cycle changes the running cost, how the heat feels and whether the house needs gas at all.

Running Cost per Hour Against Gas Heating

One Melbourne guide puts a 7-star reverse cycle split at around $0.11 to $0.22 per hour against $0.22 to $0.38 for 5-star ducted gas, and estimates annual heating for a well-insulated three-bedroom home at around $300 to $550 for reverse cycle against $700 to $1,100 for ducted gas (homeupkeep.com.au, June 2026, assuming gas at $0.045 per MJ and electricity at $0.32 per kWh). The Victorian Energy Upgrades program states that replacing a gas room heater with an efficient reverse cycle unit can save up to $460 a year, and up to $1,140 for a ducted gas heater. Actual costs depend on tariffs, insulation and how the system is used.

Comfort, Safety and Indoor Air Quality

A reverse cycle unit burns no fuel inside the house, so there is no flame, pilot light, flue or combustion gas to manage. Gas appliances in Victorian rentals need a gas safety check every 2 years by a licensed gasfitter (Consumer Affairs Victoria), a check an all-electric system does not need. Heat pumps also filter the air they move, and the filters need cleaning to keep airflow up. The trade-off is feel: gas ducted heating pushes out hotter air quickly, while an inverter heat pump delivers steadier, gentler warmth once the room is up to temperature.

Carbon Emissions and Going All-Electric

Gas heating burns fossil gas in the home, while a reverse cycle system runs on electricity alone, so its emissions depend on how that electricity is generated and fall further when paired with rooftop solar. Swapping the heater is often the first step in going all-electric. A home that later replaces gas hot water and cooking as well can close its gas account and stop paying a gas supply charge. Victorian rental rules are moving the same way: the Victorian Energy Upgrades page notes that a rental space heater that breaks and cannot be repaired after 1 March 2027 must be replaced with an efficient reverse cycle air conditioner.

Burwood East Emergency Air Conditioning Repair
Clayton Emergency Air Conditioning Repair

Peak Air Conditioning Glen Waverley

How Reverse Cycle Air Conditioning Works

Reverse cycle air conditioning heats by moving heat rather than making it, which is why it uses less energy than a resistive electric heater for the same warmth. Four parts of the system explain how.

Why a Reverse Cycle Air Conditioner Is a Heat Pump

The Australian Government's Energy Rating site notes that air conditioners can also be known as heat pumps. Refrigerant circulates between the indoor and outdoor coils, absorbing heat where it evaporates and releasing it where it condenses. In winter, the outdoor coil absorbs heat from the outside air, even on a cold morning, and the indoor coil releases it into the room. Efficiency is rated by the coefficient of performance, the ratio of heating capacity to power input, so more heat comes out than the electricity put in.

The Reversing Valve Between Heating and Cooling Modes

The reversing valve is the part that makes the system reverse cycle. It is a four-way valve in the outdoor unit that switches the direction the refrigerant flows. In cooling mode the indoor coil absorbs heat and the outdoor coil rejects it; in heating mode the valve flips the flow, so the indoor coil becomes the hot side. The same valve is used during defrost. If the valve sticks, the unit can blow cool air in heat mode, which is a repair rather than a sizing fault.

Inverter Compressors and Variable Speed Output

The compressor pumps the refrigerant around the circuit. In an inverter system it changes speed instead of switching fully on and off, running hard to warm a cold room quickly and then slowing to hold the set temperature. That steadier running avoids the warm and cool swings of older fixed-speed units and usually uses less power over a full evening. Mitsubishi Electric describes the inverter as the brain of the system, and the inverter is worth confirming on the specification sheet of any unit being compared.

Is Every Split System Reverse Cycle?

No. Mitsubishi Electric notes that most split systems perform both heating and cooling, but cooling-only models exist. Daikin sells a cooling-only version of its Alira X wall unit, and Mitsubishi Electric's MSY-GY90 is a cooling-only model that it limits to Northern Australia. Older or second-hand units in a house may also be cooling-only. The model's specification sheet or Zoned Energy Rating Label shows whether it has a heating capacity, and it is worth checking before relying on an existing unit through winter.

Peak Air Conditioning Glen Waverley

Choosing the Best Reverse Cycle Air Conditioner for Heating

The best reverse cycle air conditioner for heating is one with enough heating output for the room, good heating efficiency for the local climate and a brand with support behind it. Size comes first, then brand and model.

Daikin Versus Mitsubishi Electric

Both brands make wall-mounted reverse cycle splits in a range of sizes. Mitsubishi Electric's MSZ-AP series covers 2.5 kW to 7.8 kW, lists a guaranteed outdoor operating range for heating down to minus 15°C and quotes indoor sound as low as 18 dB(A) in heating mode. Daikin offers several wall ranges, including Alira X, Zena and Cora, plus an XL Series for large open-plan rooms and floor standing units for heating-led rooms. Neither is better outright; the fair comparison is two models of the same capacity, side by side on heating stars, noise and features.

The Most Reliable Reverse Cycle Brands in Australia

Brand reliability is hard to compare from published data, so it is better judged on warranty terms, parts supply and local support. Reverse cycle brands sold in Australia include Daikin, Mitsubishi Electric, Fujitsu, Panasonic and ActronAir. Daikin states it was voted the most trusted air conditioner brand in the Reader's Digest Trusted Brands survey from 2023 to 2026, and that its splits can last 10 to 15 years or more with regular maintenance. For a Victorian Energy Upgrades discount, a home product needs a minimum 5-year warranty, and annual servicing helps any brand last.

Heating Stars on the Zoned Energy Rating Label

The Zoned Energy Rating Label gives separate heating and cooling star ratings, from 1 to 10 stars, for three climate zones: hot, average and cold. The Energy Rating Calculator identifies the right zone by postcode, and the heating stars for that zone are the ones that matter for a heating-led choice. The label also shows estimated annual energy use and separate inside and outside noise levels. Energy Rating's advice is to choose the size and features first, then compare star ratings between models of similar size.

Burwood East Emergency Air Conditioning Repair

TESTIMONIALS

What Our Reverse Cycle Air Conditioning Customers Say About Us

The Process

3 Step Process For Your Reverse Cycle Air Conditioning Needs

Booking

Call or send a booking request between 6am and 10pm, seven days, describing the system, the rooms involved and the fault or job needed.

Written Quote

The technician inspects the house or the fault, checks sizing, access and wiring, then gives a written quote before any work or part is ordered.

Job Completed

Licensed technicians install or repair the system, test it in heating and cooling modes, explain the controls and leave the required compliance certificates.

FREQUENTLY ASKED QUESTIONS

Reverse Cycle Air Conditioning In

Everything you need to know about our Reverse Cycle Air Conditioning In

What is a reverse cycle air conditioner and how does it work?

A reverse cycle air conditioner is an air conditioner that both heats and cools from the same indoor and outdoor units. It works as a heat pump, moving heat with refrigerant rather than burning fuel. In summer it takes heat out of the room and releases it outside; in winter a reversing valve flips the refrigerant flow so it draws heat from the outside air and releases it indoors. An inverter compressor then adjusts its speed to hold the set temperature.

How much does it cost to install reverse cycle air conditioning?

Melbourne cost guides put a supplied and installed 3.5 kW split at around $1,475 to $2,950 and a standard ducted system for a three-bedroom home at around $8,400 to $14,700 (whatsthedamage.com.au, November 2026). A two-head multi-split sits at around $4,200 to $7,900 in the same guide. These are indicative figures only, and Victorian Energy Upgrades discounts can reduce the price when gas heating is replaced. Peak Air Conditioning Glen Waverley gives a written quote after inspecting the home.

Is reverse cycle air conditioning cheaper to run than gas heating?

In most cases, yes. One Melbourne guide puts a 7-star reverse cycle split at around $0.11 to $0.22 per hour against $0.22 to $0.38 for 5-star ducted gas, based on its stated tariffs (homeupkeep.com.au, June 2026). The Victorian Energy Upgrades program states that replacing a gas room heater with an efficient reverse cycle system can save up to $460 a year. The actual saving depends on the home's insulation, the unit's heating stars and the household's tariffs.

What is the most efficient heating and cooling system?

For a home that needs both heating and cooling, an inverter reverse cycle heat pump is generally among the most efficient choices, because it moves heat rather than generating it. Efficiency still varies between models, so the Zoned Energy Rating Label's heating and cooling stars for the local climate zone are the way to compare. A system sized correctly for the room and zoned so it only runs where needed will use less energy than an oversized one. Regular filter cleaning keeps it running efficiently.

Is Daikin better than Mitsubishi?

Neither brand is better across the board, as both make well-regarded reverse cycle systems for Australian homes. The useful comparison is model against model at the same capacity, looking at heating stars on the energy label, rated heating output, noise levels and features such as wi-fi control. Mitsubishi Electric's MSZ-AP series lists heating operation down to minus 15°C outdoors, while Daikin offers floor standing units for heating-led rooms. Peak Air Conditioning Glen Waverley quotes the brand and model that suit the room.

Is a heat pump the same as a reverse cycle air conditioner?

Yes, a reverse cycle air conditioner is a type of heat pump, and the Australian Government's Energy Rating site notes that air conditioners can also be known as heat pumps. The term heat pump is also used for heat pump hot water systems, which heat water instead of air. So every reverse cycle air conditioner is a heat pump, but not every heat pump is an air conditioner. For home heating and cooling, the two terms describe the same technology.

Request A Free Reverse Cycle Air Conditioning Quote

GET A FREE QUOTE