Peak Air Conditioning Glen Waverley supplies and installs ducted heating Glen Waverley homes use to warm every room from one central heater. The work covers new gas ducted heating, replacement of an old or failed gas heater on the existing ducts, and electric heat pump systems for households moving off gas. Each job starts with a heat-load check of the rooms, the insulation and the ceiling heights, so the heater is sized to the house rather than guessed. Floor or ceiling outlets, the return air grille, the flue and the gas connection are set out in a written quote that names the heater model. Gas work is carried out by a licensed gasfitter registered with the Building and Plumbing Commission, who issues a compliance certificate when the job is finished. Phones are answered from 6am to 10pm, seven days, for quotes and installation bookings.
GET A FREE QUOTE
Air conditioning work in Glen Waverley draws on three licensed trades: refrigerant handling, electrical connection and, for gas heating, gasfitting. Peak Air Conditioning Glen Waverley is based in the suburb, so a job off Kingsway, in a Legend Park Estate house or in a new townhouse near the station is a local trip rather than a drive across Melbourne. Two things decide whether a new or repaired system performs: who handles the work, and how the system is sized for the rooms it serves.
Peak Air Conditioning Glen Waverley
Ducted heating warms the whole house from one heater, pushing warm air through insulated ducts to an outlet in each room. In Glen Waverley that heater is usually a gas ducted unit, although electric heat pump systems are now the main alternative for households planning to leave gas behind.
A new installation suits a house that has never had central heating, or one being renewed as Glen Waverley's 1950s to 1970s housing stock ages. The installer plans where the heater sits, how the ducts run through the roof or subfloor and where each outlet goes. It is the bigger job of the two gas options, because every duct, outlet and the return air path are built from scratch, so the price reflects the whole system rather than just the heater.
Many Glen Waverley houses already have gas ducted heating from an earlier owner, and the heater eventually reaches the end of its life. A replacement swaps the heater while keeping the ducts and outlets if they are still sound, which keeps the cost and the disruption down. The installer checks the existing ducts for tears, crushing and missing insulation before relying on them, because a new heater cannot make up for air leaking into the roof space.
Gas ducted heaters come in three mounting styles. A roof-space unit sits in the ceiling and feeds ceiling outlets, an under-floor unit sits in the subfloor and usually feeds floor vents, and an external unit stands outside against a wall in a weatherproof cabinet. Brivis lists ducted heating as needing ductwork and enough roof or underfloor space, so the choice depends on where the existing heater sits, the clearance available and whether the house is single or double storey.
Brivis ducted gas heaters are now sold through Rinnai Australia, whose current range runs from the 3-star Buffalo BX3C and Classic Compact to the 5-star Buffalo BX5C and the StarPro 4, 5 and 6 series, with the StarPro 6 carrying a 6-star gas energy efficiency rating. Braemar, part of Seeley International, sells ducted gas heaters and gas wall furnaces and describes one of its models as the world's first 7-star equivalent ducted gas heater. More stars mean less gas burned for the same heat, and one Melbourne cost guide estimates newer 6-star units run 30 to 40 percent cheaper than 3-star units (homeupkeep.com.au, June 2026).
Peak Air Conditioning Glen Waverley
A ducted heating installation follows a set order, and each stage affects how evenly the house heats.
Brivis lists the factors that set heater size as total floor area, ceiling height, insulation and glazing, and orientation and climate zone, worked out through a whole-of-home heat load calculation. The installer measures each room, notes which have high or raked ceilings, checks the ceiling insulation and looks at large north or west-facing windows. An undersized heater runs flat out and still leaves rooms cold, while an oversized one cycles on and off and wastes gas.
The ducts carry warm air from the heater to each room, so they need to be insulated and sealed at every joint. Floor outlets suit an under-floor heater and put warm air in at the lowest point of the room, while ceiling outlets suit a roof-space heater and work well in homes built on a concrete slab. Outlet size and position are matched to each room's heat load, so a large living area gets more airflow than a small study.
The heater is connected to the gas supply, and the flue carries combustion products out of the house through the roof or an external wall. The return air grille draws cooled air back to the heater, usually from a hallway or central living area, and it needs to be large enough that the heater is not starved of air. Doors that are closed most of the time can need an undercut or a transfer grille so air can find its way back.
At commissioning the gasfitter tests the gas connection, checks the burner and flue, measures airflow at the outlets and sets up the controller. Energy Safe Victoria classes domestic central heaters as Type A gas appliances, and the Building and Plumbing Commission requires a compliance certificate for installing or replacing any Type A gas appliance, regardless of cost. The licensed plumber must give the customer that certificate within five days of finishing the work, so keep it with the heater's manual.
Peak Air Conditioning Glen Waverley
Peak Air Conditioning Glen Waverley sets out who does the gas work, what is being installed and what it costs before the job is booked.
Energy Safe Victoria advises using a licensed gasfitter for any installation, repair or renovation that involves gas. In Victoria gasfitters hold their registration or licence with the Building and Plumbing Commission, and the commission's website has a public tool to find and check a practitioner before work starts. Only a licensed plumber can issue the compliance certificate for a gas heater installation, so the licence matters for the paperwork as well as for safety.
After the site visit the quote lists the heater brand, model, capacity and star rating, the number and position of outlets, whether existing ducts are reused or replaced, and any flue, gas line or electrical work. Removal of the old heater is shown as its own line where it applies. The household can compare models side by side and ask questions before signing, and the price holds unless the agreed scope changes. Manufacturer warranty applies when the heater is installed to the manufacturer's requirements.
Phones are answered from 6am to 10pm, seven days a week, and site visits can be booked inside those hours, including early mornings and weekends. A heating quote needs someone home while the installer checks the roof space or subfloor, so an evening or Saturday visit avoids taking time off work. When a heater fails in the middle of winter, same-day visits are offered where possible for homes around Kingsway, The Glen and both sides of Springvale Road.
Peak Air Conditioning Glen Waverley
Ducted heating prices depend on heater capacity and star rating, how many outlets the house needs, whether existing ducts can be reused and how easy the roof or subfloor is to reach. The figures below are indicative ranges from published Melbourne cost guides, not Peak's own prices, and a written quote follows an inspection.
The whatsthedamage.com.au Melbourne guide puts gas ducted heating supply and installation at around $4,000 to $11,550, with a typical job near $7,350 (updated November 2026). A second Melbourne guide prices supply and installation by heater: around $4,800 to $6,400 for a 4-star 20 kW unit suited to a 3-bedroom house, $5,800 to $7,800 for a 5-star 23 kW unit for a 3 to 4-bedroom home, and $7,200 to $10,000 for a 6-star 30 kW unit for 4 or more bedrooms or two storeys (homeupkeep.com.au, June 2026).
Swapping only the heater costs less because the ducts, outlets and return air grille stay in place, and homeupkeep.com.au puts a 3-star 16 kW replacement for a 2-bedroom unit or townhouse at around $3,800 to $5,200. Where the old ducts are torn, crushed or uninsulated, whatsthedamage.com.au puts whole-house ductwork replacement at around $2,000 to $6,300, typically $3,775, with new insulated flexible ducts. Adding new ducts to a heater swap moves the job closer to the price of a full new system.
An electric ducted system is a reverse cycle unit, so it is priced like ducted air conditioning: whatsthedamage.com.au puts a standard system for a 3-bedroom home, or a single-storey 4-bedroom with good roof access, at around $8,400 to $14,700, and larger or zoned homes at around $12,600 to $23,100. The Victorian Energy Upgrades program lists indicative discounts for replacing a ducted gas heater with ducted reverse cycle of up to $2,520 for 10 kW, $4,200 for 16 kW and $5,530 for 22.4 kW, which narrows the gap with gas.
Peak Air Conditioning Glen Waverley
The main choice for a Glen Waverley household is between a gas heater that only heats and a ducted reverse cycle system that heats in winter and cools in summer through the same ducts.
One Melbourne guide estimates that a typical home running a gas ducted heater for 4 to 6 hours a day through winter spends around $850 to $1,800 on gas, and puts a year of heating for a well-insulated 3-bedroom home at around $700 to $1,100 with 5-star ducted gas against $300 to $550 with reverse cycle (homeupkeep.com.au, June 2026). Those estimates rest on the guide's own tariffs. The Victorian Energy Upgrades program states bill savings of up to $1,140 a year when a ducted gas heater is replaced with an efficient reverse cycle system.
Brivis describes gas ducted heating as fast and effective in cold weather, because the burner heats the air directly and warm air reaches the outlets soon after start-up. Floor outlets release that warm air at foot level, where it rises through the room. A ducted reverse cycle system usually heats through ceiling outlets, so warm air starts near the ceiling and relies on airflow to reach the floor. Daikin notes that a heating unit mounted lower warms the ground more effectively, which is the same reason floor vents feel warm underfoot.
Some households replace gas ducted heating with wall-mounted split systems in the rooms they use most, rather than another whole-home system. The Victorian Energy Upgrades program lists up to $2,520 for replacing a ducted gas heater with four split systems and up to $2,940 for a multi-split with a 10 kW outdoor unit. Splits leave hallways and spare rooms unheated and put a unit on each wall, while ducts heat every room evenly from hidden outlets.
Peak Air Conditioning Glen Waverley
Converting to electric means taking the gas heater out, installing a reverse cycle system in its place and making the old gas connection safe. Braemar markets a reverse cycle unit, the Dominator Series 2, that it says fits the ceiling space to directly replace an existing gas heater while leaving the other components intact, and other brands sell full ducted reverse cycle systems for the same job.
The Victorian Energy Upgrades program lists up to $5,530 off when a ducted whole-of-home gas heater is removed or replaced with an efficient reverse cycle air conditioner. To qualify, the product must be approved under the program, be a high-efficiency reverse cycle air conditioner and carry a minimum 5-year warranty for a home, and a replaced system must be in a property more than 2 years old (energy.vic.gov.au, updated 29 October 2026).
The Victorian Government notes that a dual-fuel home pays two energy bills and two service charges, while an all-electric home pays one bill with one service charge. Removing the gas heater alone does not stop the gas charge if the house still has gas hot water or a gas cooktop. Once every gas appliance is replaced, the household can ask its gas retailer to close the connection, and the government estimates existing homes without solar save around $1,900 a year by switching from gas to efficient electric appliances.
The old heater is disconnected from the gas line, the line is capped and pressure-tested, and the flue is removed or sealed where it passes through the roof or a wall. That is gasfitting work, so it is done by a licensed gasfitter registered with the Building and Plumbing Commission. Unused ducts can stay in the subfloor or be removed, depending on whether the new system runs through the ceiling, and the quote shows which applies.
Peak Air Conditioning Glen Waverley
Ducted heating is not the only way to warm a Glen Waverley home, and two other systems come up often at quote stage. Ongoing care of an existing ducted heater sits on the ducted heating service and repairs page.
Hydronic heating circulates hot water from a boiler or heat pump through panel radiators on the walls, or through pipes laid in a concrete floor slab. It heats without blowing air around the room, but it cannot cool, and a ducted reverse cycle system or split systems would still be needed for summer. In-slab pipes have to go in when the slab is poured, so they suit the townhouses being built where larger Glen Waverley blocks are subdivided, rather than an existing house.
A gas wall furnace is a flued heater set into or against a wall, heating one living area or a small unit without any ducts. Braemar lists gas wall furnaces alongside its ducted heaters. It is a smaller installation than a ducted system, but bedrooms at the far end of the house stay cold. In a rental, a wall furnace still needs a gas safety check every 2 years by a licensed gasfitter (Consumer Affairs Victoria), and landlords should check the current Consumer Affairs Victoria heating rules before choosing a replacement.
Moving from a wall furnace to ducted heating means finding room for a heater in the roof, subfloor or outside, running ducts to every room and adding a return air grille. The old furnace is disconnected and its gas line capped, and the wall opening and flue are sealed or patched. Single-storey houses with a clear roof space are the most straightforward, while townhouses with little ceiling space are assessed on site before any price is given.

Call or send a booking request between 6am and 10pm, seven days, describing the system, the rooms involved and the fault or job needed.

The technician inspects the house or the fault, checks sizing, access and wiring, then gives a written quote before any work or part is ordered.

Licensed technicians install or repair the system, test it in heating and cooling modes, explain the controls and leave the required compliance certificates.
Melbourne cost guides put gas ducted heating supply and installation at around $4,000 to $11,550, with a typical job near $7,350 (whatsthedamage.com.au, November 2026). A 5-star 23 kW heater for a 3 to 4-bedroom home sits around $5,800 to $7,800 in a second guide (homeupkeep.com.au, June 2026). Reusing sound ducts lowers the price, while new ductwork, a difficult roof space or a two-storey house raises it. A written quote is given after an inspection.
For Victorian homes, both the cost guides and the state government point to efficient reverse cycle air conditioning as cheaper to run than gas. One Melbourne guide estimates a 7-star reverse cycle split at around $0.11 to $0.22 an hour against $0.22 to $0.38 for 5-star ducted gas, based on its own tariffs (homeupkeep.com.au, June 2026). The Victorian Energy Upgrades program states savings of up to $1,140 a year from replacing a ducted gas heater with efficient reverse cycle. Actual cost depends on insulation, how many rooms are heated and the household's tariffs.
Yes. Ducted reverse cycle air conditioning heats through ceiling outlets in winter and cools in summer, and it runs on electricity alone. Braemar also sells the Dominator Series 2, which it says replaces an existing gas heater unit in the ceiling space while leaving the other components intact. Eligible reverse cycle systems can attract a Victorian Energy Upgrades discount of up to $5,530 when a ducted gas heater is replaced.
One Melbourne cost guide advises planning to replace the whole unit at around 15 to 20 years (homeupkeep.com.au, June 2026). Regular servicing helps a heater reach that age, and a heater that fails a safety check earlier may need replacing sooner. Servicing, carbon monoxide testing and repairs are covered on the ducted heating service and repairs page. When the heater does reach the end of its life, ducts that are still sound may be reused for the new one.
Yes, as long as there is room for the heater and the ducts. Brivis lists ductwork and sufficient roof or underfloor space as requirements, so a single-storey house with good roof access is the simplest to fit. Two-storey homes and townhouses with little ceiling space need more planning, sometimes with an external unit or separate runs for each level. The site visit confirms whether a ducted system will fit before a quote is written.
Brivis bases sizing on total floor area, ceiling height, insulation and glazing, and orientation and climate zone, worked out through a whole-of-home heat load calculation. As a rough guide, one Melbourne cost guide matches a 16 kW heater to a 2-bedroom unit or townhouse, 20 kW to a 3-bedroom house, 23 kW to a 3 to 4-bedroom home and 30 kW to 4 or more bedrooms or two storeys (homeupkeep.com.au, June 2026). High ceilings, poor insulation or large windows can push a house into the next size up. The heat-load check at the site visit sets the final capacity.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm