Aircon cleaning in Glen Waverley goes past the filters to the parts where mould and dust actually collect: the evaporator coil, the barrel fan, the drain tray and the louvres. Peak Air Conditioning Glen Waverley deep cleans wall-mounted split systems, ducted indoor units, ceiling cassettes and floor consoles in homes across Glen Waverley and nearby City of Monash suburbs. The unit stays on the wall while a drip bag catches the run-off, the coil and fan are washed with coil cleaner and rinsed, the drain is flushed, and the system is dried and test run before handover. Melbourne cost guides put a one-unit split system clean at around $150 to $200, and a written price is given before any panel comes off. Cleaning visits run from 6am to 10pm, seven days, with same-day visits where possible.
GET A FREE QUOTE
Air conditioning work in Glen Waverley draws on three licensed trades: refrigerant handling, electrical connection and, for gas heating, gasfitting. Peak Air Conditioning Glen Waverley is based in the suburb, so a job off Kingsway, in a Legend Park Estate house or in a new townhouse near the station is a local trip rather than a drive across Melbourne. Two things decide whether a new or repaired system performs: who handles the work, and how the system is sized for the rooms it serves.
Peak Air Conditioning Glen Waverley
Aircon cleaning in Glen Waverley covers the three main indoor unit layouts found in local homes, and each one is opened and washed in a different way. Mitsubishi Electric notes in its own cleaning guide that ducted, cassette and bulkhead systems may require professional cleaning methods, because their coils and fans sit out of reach of an owner with a vacuum.
A wall-mounted split is the unit most Glen Waverley households clean, whether it sits in a 1960s lounge room or the upstairs bedroom of a newer townhouse. The front cover, filters and louvres come off, which exposes the coil face and the long barrel fan behind it. Both are washed where the unit hangs, so nothing is unbolted from the wall and the refrigerant pipes stay connected. The outdoor unit is cleared of leaves and cobwebs on the same visit so it can shed heat freely.
A ducted system keeps its indoor fan coil in the roof space, with a return air grille in a hallway or living area drawing air back to it. Cleaning starts at the grille, where the filter is removed and washed and the grille itself is wiped clear of the grey dust that gathers on its slats. In the roof, the fan coil's drain tray and accessible coil face are cleaned and the drain is flushed. The ducts and ceiling outlets are a separate job, which The Quote Yard also lists as a separate service, and system options are covered on the ducted air conditioning page.
A ceiling cassette sits flush with the ceiling and blows air out in several directions from a single grille, so it is cleaned from a ladder with the drip bag hung beneath it. A floor console stands low on the wall, and Daikin describes floor standing units as suiting rooms where upper wall installation is not possible. Both are built differently from a wall split, which is why Melbourne cleaning guides such as Mr Duct's quote cassette and other non-wall units separately. The layout is confirmed at booking so the right covers and access gear come on the day.


Peak Air Conditioning Glen Waverley
A deep clean follows a set order, so the dirt loosened at each step is carried out of the unit rather than pushed further inside. Mr Duct's Melbourne guide warns that spraying water or chemicals into a unit without the right covers and a wash bag can push dirt deeper, wet the electrics or bend the fins, and the five steps below are built around avoiding that.
Before any liquid goes near the unit, the power is isolated, drop sheets go down and a waterproof drip bag is fitted under the indoor unit. The bag wraps around the bottom of the case and funnels into a bucket, so the dirty rinse water runs away from the wall, the skirting and the floor. The control board and wiring at the side of the unit are covered so they stay dry during the wash.
The evaporator coil is the block of thin aluminium fins that chills or warms the air as it passes through. Because it runs wet in cooling mode, dust that slips past the filter sticks to it and becomes the base layer where mould grows. Coil cleaner is applied across the face and left to work into the fins, then rinsed through at low pressure so the loosened grime drains into the bag. Fins are combed straight where they have been bent, so air can pass through evenly again.
The barrel fan is the long, cylindrical blower behind the louvres, and its curved blades are where black build-up is often heaviest. On some models the fan can be released and taken out for washing; on others it stays in place and is brushed and rinsed with a controlled spray while it is turned by hand. Mitsubishi Electric, for example, describes some of its models as fitted with a Quick Clean Body that allows easy fan access. The method depends on the brand and model, and it is chosen on the day.
Under the coil sits the drain tray, which collects the water the coil pulls from the air and sends it out through the condensate line. Sludge in the tray and slime in the line are what cause a unit to overflow, so the tray is scrubbed and the line is flushed through until clean water runs freely at the outlet outside. A sagging or kinked line found at this step is noted for the household, because a line that falls the wrong way will block again after any clean.
Once the rinse is finished, the bag is removed, the casing and louvres are wiped down and refitted, and the washed filters go back in dry. The unit is then run on fan to help dry the inside, followed by a short run in cooling and heating to confirm that air comes out strongly and that no water drips from the case. Mr Duct's guide also finishes its clean with an airflow and temperature check. The household sees the unit running before the visit ends.
Peak Air Conditioning Glen Waverley
A unit usually shows that it needs a deep clean well before it stops working. Mr Duct lists a musty smell, black specks on the louvres and weaker airflow than the previous summer among the signs seen most often on Melbourne jobs, and the four symptoms below each point to build-up in a different part of the unit.
Black spots on the louvres, or a dark coating visible on the barrel fan when you shine a torch up into the outlet, are the most obvious sign. The Better Health Channel notes that mould often looks like a stain, smudge or discolouration, and that the most common moulds are black, green or white. When the marks are on the visible louvres, the fan and coil behind them are usually carrying more, and wiping the louvres alone leaves the source in place.
A musty or sour smell in the first minute after the unit starts is a common complaint, and Mr Duct names it as one of the signs most seen on Melbourne jobs. The smell comes from damp build-up on the coil, fan and drain tray that sits still while the unit is off and is then blown into the room when the fan starts. An antibacterial spray can mask it for a few days, but the smell tends to return until the build-up is washed out.
Water dripping from the bottom of the indoor unit, or a damp patch on the wall below it, usually means the drain tray or condensate line is partly blocked with sludge. The water the coil collects in cooling mode then has nowhere to go and spills over the edge of the tray. Flushing the tray and line during a clean often clears it, but a cracked tray, a failed drain pump or a line with the wrong fall is a fault, and that is handled on the air conditioning repair page.
If you have washed the filters and the air coming out is still weak, the restriction sits further inside the unit. A coil face packed with dust, or a barrel fan with thick build-up on its blades, moves less air even when the filters are spotless. That points to a deep clean rather than another filter wash. If the airflow is strong but the air is not cold or warm enough, the cause is more likely a refrigerant or electrical fault than dirt.


Peak Air Conditioning Glen Waverley
Peak Air Conditioning Glen Waverley sets out three things that shape a cleaning visit: who opens the unit, when the price is confirmed, and when the visit can happen.
The Australian Refrigeration Council states that any person who works on refrigeration and air conditioning equipment must hold a refrigerant handling licence, and that this covers servicing or maintaining the equipment whether or not refrigerant is present. The technicians who open and clean the units hold that licence, known as ARCtick. Daikin, Mitsubishi Electric, Fujitsu and Panasonic indoor units each release their covers, louvres and fans in their own way, so the brand and model are noted at booking and the technician works to that unit's layout. If a fault turns up mid-clean, a licensed technician can explain it on the spot.
The price is agreed before the work starts, based on the number of indoor units, their type and how the indoor and outdoor units are reached. A photo of each unit sent at booking helps set it, and the figure is confirmed in writing on the day before any panel comes off. If the technician finds a worn part or a fault once the unit is open, it is explained and quoted separately, and no extra work goes ahead without your approval.
Cleaning visits run from 6am to 10pm, seven days, so a clean can fit before work, in the evening or across a weekend, and same-day visits are offered where possible. Because the room needs to be clear around the unit and someone needs to be home for the visit, early and late slots help households where everyone works during the day. Visits cover both sides of Springvale Road, from the streets around Kingsway and The Glen to the homes near Jells Park and Dandenong Creek.
Peak Air Conditioning Glen Waverley
Published Melbourne guides give a useful starting point for what aircon cleaning costs. The figures below are indicative, taken from those guides rather than from a price list, and the written price is confirmed once the units and access are known.
Mr Duct's October 2026 Melbourne guide says most Melbourne companies charge about $150 to $200 to clean one wall split system. It lists its own price as $180 for the first indoor unit, $160 for the second, $150 for the third and $140 for each after that, including the outdoor unit and GST, which shows how the price per unit falls when several units are cleaned on one visit. QuickAir's September 2026 guide puts a deep clean with a chemical wash at around $200 to $350, and Climate Control Solutions, a Melbourne installer, gives $250 to $400 for a split system service plus deep clean. The spread reflects how much each price includes, so it pays to ask whether the coil and barrel fan are part of the job.
None of the Melbourne guides reviewed publishes a separate deep-clean price for a ducted fan coil or a ceiling cassette, and Mr Duct quotes cassette and other non-wall units separately because they are built differently. The price for these units is set by roof or ceiling access, the size of the unit and how heavily it is soiled. If the ducts themselves need cleaning, that is a separate job: The Quote Yard lists duct cleaning in Victoria at around $250 to $600, and Mr Duct's duct cleaning guide says its pricing starts at $260 for 5 outlets.
Two things can lift the price of a clean. The first is access: Mr Duct's standard price covers an outdoor unit no more than 2 metres above the ground, and says a unit high on a second-storey wall or on a roof needs extra equipment, so an extra charge may apply. Two-storey townhouses on subdivided Glen Waverley blocks can put an outdoor unit in exactly that position. The second is condition, since a unit with heavy mould through the coil and fan takes longer to wash out. Either factor is identified from photos or on arrival and included in the written price before the clean starts.


Peak Air Conditioning Glen Waverley
A deep clean and a routine service are different jobs, even though both involve opening the unit. Mr Duct puts it simply: a clean is not a service, and regassing and repairs need an ARC licensed technician. The yearly air conditioning service checks the system's operation, while a deep clean washes the inside of the indoor unit.
A filter wash, whether done at home or as part of a cheap advertised deal, cleans only the mesh screens at the front of the unit. Mr Duct notes that many deals well under $100 cover a filter wash, a wipe of the cover and an antibacterial spray. That leaves the interior of the coil, the barrel fan blades, the drain tray and the inside of the louvre housing untouched, and those are the damp surfaces where build-up sits. Mitsubishi Electric's owner guidance says water should never be applied to the inner workings of a heat pump by the owner, which is why those parts are left to a professional clean.
A full chemical clean, with coil cleaner applied and rinsed through, is the right call when the signs described above appear: black marks on the louvres, a musty smell at start-up, or weak airflow that a filter wash has not fixed. It also suits a unit bought with a house, or one that has not been opened in years, since the history of its care is unknown. A standard service, by contrast, suits a unit that is clean inside and just needs its yearly check of drains, electrics and performance.
Once the coil and fan are clear, the unit can move its full volume of air again, so rooms tend to reach the set temperature sooner. The Quote Yard notes that a dirty coil forces the system to run longer and draw more power for the same result, and Mitsubishi Electric says dust and dirt can restrict airflow and reduce a unit's overall efficiency. No published source gives a reliable figure for how much a clean saves, because it depends on how dirty the unit was and how much it runs. Washing the filters every couple of weeks in peak season keeps that improvement for longer.
Peak Air Conditioning Glen Waverley
Aircon cleaning removes mould, dust and odour build-up from inside the unit. It is cleaning of the air conditioner, not a treatment for any health condition, and the points below are drawn from what the Better Health Channel, the Victorian Government's health information site, says about indoor mould.
The Better Health Channel says airborne mould spores are commonly found in both indoor and outdoor environments, and that mould grows best in damp and poorly ventilated areas. Inside a split system, the coil and drain tray stay damp after cooling, and the barrel fan then blows air across those surfaces every time the unit runs. Washing the growth off the coil, fan and tray removes it from the air path. The same source notes that the way to control indoor mould growth is to control moisture, so running the unit on fan for a while after cooling helps it dry inside.
The Better Health Channel states that mould in buildings can worsen asthma and allergic conditions, and lists people with allergies or severe asthma among those more susceptible. It advises seeking medical advice if you are concerned about the effects of mould, and that advice belongs with a doctor, not an air conditioning technician. What a clean can do is take the visible mould and dust out of the unit in the bedroom or living room where the family spends its time. Coil cleaner is rinsed out before the unit is dried and run, so the room is ready to use once the visit ends.
Mr Duct's Melbourne guide recommends a professional clean once a year, ideally in spring before the first hot week, and says not to stretch it past a year if the unit runs most days, there are pets, or someone at home has asthma or allergies. Mitsubishi Electric recommends washing the filters every two weeks during peak seasons, with a heat exchanger clean at least once every season. The Better Health Channel also advises maintaining and servicing heating, ventilation and cooling systems following the manufacturer's instructions. A unit used only lightly can go longer, and the owner's manual for the model is the place to check.


Call or send a booking request between 6am and 10pm, seven days, describing the system, the rooms involved and the fault or job needed.

The technician inspects the house or the fault, checks sizing, access and wiring, then gives a written quote before any work or part is ordered.

Licensed technicians install or repair the system, test it in heating and cooling modes, explain the controls and leave the required compliance certificates.
Mr Duct's October 2026 Melbourne guide says most Melbourne companies charge about $150 to $200 to clean one wall split system, and lists its own prices falling from $180 for the first unit to $140 each from the fourth. Ducted and cassette units are usually quoted separately because they are built differently. High outdoor units and hard-to-reach indoor units can add to the price. These figures are indicative, and a written price is given once the units and access are known.
QuickAir's September 2026 Melbourne guide puts a deep clean with a chemical wash at around $200 to $350 for a split system. Climate Control Solutions, a Melbourne installer, gives $250 to $400 for a split system service combined with a deep clean. Some cleaners include the chemical wash in their standard clean, while cheaper deals may only wash the filters, so it is worth asking whether the coil and barrel fan are included. Any price quoted is confirmed in writing before the work starts.
Yes. A wall-mounted split is deep cleaned where it hangs, with the covers, filters and louvres removed and a drip bag fitted underneath to catch the rinse water. The coil and barrel fan are washed in place, and the refrigerant pipes stay connected. Removing a unit from the wall is generally only needed when it is being replaced or moved to another room, which is an installation job rather than a clean.
Mr Duct's Melbourne guide recommends a professional deep clean once a year, best booked in spring. It advises not stretching that past a year where the unit runs most days, there are pets, or someone in the home has asthma or allergies. Between cleans, Mitsubishi Electric recommends washing the filters every two weeks during peak seasons. The owner's manual for your model gives the manufacturer's own guidance.
The Better Health Channel says mould in buildings can trigger nasal congestion, sneezing, cough, wheeze and respiratory infections, and can worsen asthma and allergic conditions. It lists people with weakened immune systems, allergies or severe asthma as more susceptible. It advises seeking medical advice if you are concerned about the effects of mould. A deep clean removes mould build-up from the air conditioner itself, but it is not a medical treatment.
Mr Duct's Melbourne guide says most split system units take around 1 to 2 hours each, depending on the size of the unit and how dirty it is. A home with several units will take longer, as each indoor unit is cleaned in turn. Ducted fan coils in the roof and ceiling cassettes can take longer again because of the access involved. An expected time is given when the visit is booked.
GET A FREE QUOTE
BUSINESS
SERVICES
OPERATING HOURS
Sun: 6:00am - 10:00pm
Mon: 6:00am - 10:00pm
Tue: 6:00am - 10:00pm
Wed: 6:00am - 10:00pm
Thu: 6:00am - 10:00pm
Fri: 6:00am - 10:00pm
Sat: 6:00am - 10:00pm